Copy and Edit

Detailing Vehicles Final Exam

Description

This quiz will test your knowledge about properly detailing vehicles. This test includes examination of products, methods of application, etc.
jeremybearhunter
Quiz by jeremybearhunter, updated more than 1 year ago
jeremybearhunter
Created by jeremybearhunter over 10 years ago
342
0
0
1 2 3 4 5 (0)

Resource summary

Question 1

Question
What is the correct order of professionally detailing a car?
Answer
  • Wash, Clay, Polish, Sealant/Wax.
  • Wash, Polish, Clay, Sealant/Wax.
  • Wash, Clay, Polish, Wax/Sealant.
  • Wash, Polish, Sealant/Wax, Clay.

Question 2

Question
Which of the following processes are suitable when washing and drying microfiber towels?
Answer
  • Wash with or without mild detergent in warm water separate from other articles of clothing, tumble dry without dryer sheets on low heat, or air dry.
  • Wash only with water separate from other articles of clothing , and only air dry.
  • Wash with powder detergent in warm water, and only air dry.
  • None of these.
  • All of these.

Question 3

Question
Which of the following statements are true regarding the use of dryer sheets when drying microfiber towels?
Answer
  • Dryer sheets will cause the towels to loose absorption ability.
  • Dryer sheets will cause microfiber towels to streak, especially when working around glass.
  • Dryer sheets are safe to use when drying microfiber towels.
  • Dryer sheets should always be used to avoid static electricity; thus causing the microfiber towels to stick together.

Question 4

Question
Which of the following are terms describing paint conditions commonly seen in the detailing world?
Answer
  • Swirl marks.
  • Oxidation.
  • Water spots.
  • Etching.
  • Holograms.
  • Buffer swirls.
  • All of these.
  • None of these.

Question 5

Question
Which of the following describes the most significant difference between a sealant and a wax?
Answer
  • A wax is more durable, so a wax should be applied before applying a sealant.
  • A sealant is more durable, so a sealant should be applied before applying a wax.
  • A sealant and a wax should not be used at the same time.
  • None of these are correct.

Question 6

Question
When using a DA polisher, why should the machine not be removed from the paint while the machine is still in motion?
Answer
  • To avoid product splatter.
  • To avoid possible buffer swirls.
  • All of these.
  • None of these
  • To lengthen the life of the barring in the machine.

Question 7

Question
What does detailing clay accomplish in the detailing process?
Answer
  • It is a chemical only designed to thoroughly clean glass.
  • It is a product that is used to remove above surface bonded contaminants that washing wont remove. It can be used on paint, wheels, glass, and even plastic.
  • It is a product that is designed only for removing paint over spray. It can't be used on glass or wheels.
  • None of these.

Question 8

Question
When applying paint correction chemicals, why should one not allow the chemical to dry?
Answer
  • When the product drys, there is a minimum amount of lubricity; which is a needed element to prevent paint damage.
  • When some correction chemicals dry, they are very tough to remove.
  • Both of these.
  • None of these.

Question 9

Question
What is an example of a product that is a one step clean, polish, and protect?
Answer
  • Meguiar's Cleaner Wax
  • Meguiar's Ultimate Polish.
  • Meguair's Water Spot Remover.
  • All of these.
  • None of these.

Question 10

Question
From the following products, which would cut through severe oxidation, water spots, and swirl marks the fastest?
Answer
  • Meguiar's Swirl Remover 2.0
  • Meguiar's Swirl X Swirl Remover.
  • Chemical Guys V32
  • Chemical Guys V38

Question 11

Question
When cleaning glass, which one of the following works best to prevent "streak chasing?"
Answer
  • Final wipes should be horizontal for interior glass surfaces, and the final wipe should be vertical on exterior glass surfaces.
  • There are no actual ways to prevent "streak chasing."

Question 12

Question
What is the word/phrase that describes why Ultimate Compound cuts but finishes well.
Answer
  • Micro-abrasive technology.
  • There are no abrasive products that finishes well.
  • Both of these.
  • None of these.

Question 13

Question
When detailing the engine bay of a vehicle, one should always______.
Answer
  • Put a rag or the like into the air intake so that no water gets in.
  • Cover the alternator with a plastic bag.
  • Both of these.
  • None of these.

Question 14

Question
What is a way to test paint to tell rather it is single stage paint?
Answer
  • Use Cleaner Wax; if color transfers to the applicator pad, then this means it is single stage paint.
  • Rub the paint with your finger; if color transfers, then this means it is single stage paint.
  • Both of these.
  • None of these.

Question 15

Question
What is the most efficient way to fold microfiber towels?
Answer
  • Folded in fourths.
  • Folded in half.
  • It is not desirable or necessary to fold the towel no more than twice.
  • Towels should be wadded up to add cushion.

Question 16

Question
Why should ammonia not be used on window tint?
Answer
  • Ammonia is an abrasive chemical that can scratch window tint.
  • Ammonia eats through the scratch resistant coating on window tint.
  • Both of these.
  • None of these.

Question 17

Question
From the listed products below, which product cuts well and finishes almost flawless?
Answer
  • Ultimate Compound.
  • Rubbing Compound.
  • Ultimate Polish.
  • None of these.
  • All of these.

Question 18

Question
Before applying spray paint to the fender well, accessories, or the like; it is important to what?
Answer
  • Thoroughly clean the surface.
  • Thoroughly sand all the rust and old paint off.
  • Both of these.
  • None of these.

Question 19

Question
Single stage paint most accurately refers to what?
Answer
  • Older cars that don't have a layer of clear coat over the paint.
  • Newer cars that have a layer of clear coat.
  • Both of these.
  • None of these.

Question 20

Question
Which of the following best describes why swirls are easily seen in the sun on a clean car?
Answer
  • Clean cars allow more back-lighting; or how the light goes through the clear coat and bounce back off the color pigments in the paint.
  • Clean cars allow more light absorption.
  • Both of these.
  • None of these.

Question 21

Question
Which of the following pads are the most aggressive?
Answer
  • Orange light cutting foam pad.
  • Purple wool pad.
  • Yellow cutting foam pad.
  • White polishing foam pad.

Question 22

Question
From the following products listed, which one cuts well but typically finishes terrible?
Answer
  • Rubbing Compound.
  • Ultimate Compound.
  • Ultimate Polish.
  • None of these.
  • All of these.

Question 23

Question
Which of the following list shows a product list in order from most aggressive to least aggressive?
Answer
  • Ultimate Compound, Swirl Remover 2.0, Ultimate Polish.
  • Ultimate Compound, Ultimate Polish, Swirl Remover 2.0.
  • Swirl Remover 2.0, Ultimate Polish, Ultimate Compound.
  • None of these.

Question 24

Question
Which of the following may result from improper use of a DA or Rotary buffer?
Answer
  • Burning through the paint.
  • Instilling holograms.
  • Instilling buffer swirls.
  • All of these.
  • None of these.

Question 25

Question
Wash cloths are suitable replacements for a wash mitt.
Answer
  • True
  • False

Question 26

Question
When washing microfiber towels, one should always avoid washing them with other articles of clothing.
Answer
  • True
  • False

Question 27

Question
When applying a wax and a sealant, one should always apply the sealant first.
Answer
  • True
  • False

Question 28

Question
When drying microfiber towels, one should always use dryer sheets.
Answer
  • True
  • False

Question 29

Question
When removing above surface bonded contaminants from automotive paint with detailing clay, one should never use clay that has been dropped on the ground.
Answer
  • True
  • False

Question 30

Question
Any detailing chemical that can be used with a machine, also means that it can be used with any type of machine.
Answer
  • True
  • False

Question 31

Question
Hand application, DA, and rotary are the most common methods of applying detailing chemicals.
Answer
  • True
  • False

Question 32

Question
When using a rotary buffer or a DA polisher, one should never hold the machine in one place; it should be in constant motion.
Answer
  • True
  • False

Question 33

Question
When detailing a car, the car should always be in the shade.
Answer
  • True
  • False

Question 34

Question
When removing wax residue, one should always wipe in straight lines to avoid possible swirls from trapped particulate matter in the microfiber towel.
Answer
  • True
  • False

Question 35

Question
When applying a glaze, this should be done before applying a sealant/wax.
Answer
  • True
  • False

Question 36

Question
When using a DA polisher, one should spread the product out on the lowest speed setting.
Answer
  • True
  • False

Question 37

Question
When using a DA polisher, one should never pick the machine up off the paint while the machine is still running.
Answer
  • True
  • False

Question 38

Question
When correcting paint defects, one should always start with the most aggressive product.
Answer
  • True
  • False

Question 39

Question
When correcting paint defects, one should always start with the least aggressive product.
Answer
  • True
  • False

Question 40

Question
When correcting paint by machine or hand, one should work small areas at a time.
Answer
  • True
  • False

Question 41

Question
When applying paint correction chemicals, one should not allow the product to dry. Unlike some wax products.
Answer
  • True
  • False

Question 42

Question
When applying correction chemicals by hand or machine, one should use a lot of product.
Answer
  • True
  • False

Question 43

Question
When applying correction chemicals by hand or machine, one should never use a lot of product; five pea size dots maximum.
Answer
  • True
  • False

Question 44

Question
Before doing any paint correction, one should always clay before hand.
Answer
  • True
  • False

Question 45

Question
All waxes will fill in swirl marks.
Answer
  • True
  • False

Question 46

Question
When quick detailing a vehicle with a product such as Meguiar's Ultimate Quick Detailer, it is essential to use plenty of product to avoid possible friction caused by dust and other particulate matter during the detail process.
Answer
  • True
  • False

Question 47

Question
When using a tire shine product, it is better to use a gel that is applied by applicator pad to assure a thin durable layer to resist sling when driving.
Answer
  • True
  • False

Question 48

Question
When removing painters tape, always remove very slowly and at an angle other than 90 degrees from the surface.
Answer
  • True
  • False

Question 49

Question
When detailing a vehicle, it is essential not to use microfiber towels that have been dropped on the ground, or washed improperly.
Answer
  • True
  • False

Question 50

Question
When detailing the interior, one should always apply a product such as armor all on the floor mats.
Answer
  • True
  • False

Question 51

Question
When using glass cleaning products to clean glass with window tint on it, they should not contain ammonia.
Answer
  • True
  • False

Question 52

Question
When using any machine with a cord on a vehicle, always drape the cord over your shoulder to prevent the cord from banging the vehicle.
Answer
  • True
  • False

Question 53

Question
All waxes require drying time before removal.
Answer
  • True
  • False

Question 54

Question
When cleaning the interior of a car, it is most efficient to clean the windows first.
Answer
  • True
  • False

Question 55

Question
When cleaning the interior of a car, it is most efficient to clean the windows last.
Answer
  • True
  • False

Question 56

Question
It is safe to use a chemical degreaser such as purple power citrus cleaner on interior floor mats.
Answer
  • True
  • False

Question 57

Question
Before applying a new product that has never been used before, it should be tested first in an inconspicuous area.
Answer
  • True
  • False

Question 58

Question
It is not necessary to test new products in an inconspicuous area.
Answer
  • True
  • False

Question 59

Question
In between the time one starts and stops polishing a car, it is essential to wash the pad multiple times to ensure a clean pad that has adequate lubricity.
Answer
  • True
  • False

Question 60

Question
Before storing foam polishing pads, one should: wash again, spray with conditioner, and then store in plastic bag.
Answer
  • True
  • False

Question 61

Question
A good rule of thumb when working with detailing products is: the more product the better.
Answer
  • True
  • False

Question 62

Question
While removing severe oxidation from automotive paint, it is best to run on the lowest speed setting when using a machine such as the porter cable 7424XP DA Polisher.
Answer
  • True
  • False

Question 63

Question
The biggest difference between a rotary polisher and a DA is that DA has less power; thus making it safer for a newbie to use the machine.
Answer
  • True
  • False

Question 64

Question
When using Meguiar's Quick Detailer on a moderately dusty car, one safe way is to use a snake pattern working from top to bottom; flipping the towel to a dry, clean portion for final wipe.
Answer
  • True
  • False

Question 65

Question
When using meguair's quick detailer on a moderately dusty car, one should apply a lot of pressure to the towel for initial wipe.
Answer
  • True
  • False

Question 66

Question
When using meguair's quick detailer on a moderately dusty car, one should apply little to no pressure to the towel for initial wipe.
Answer
  • True
  • False

Question 67

Question
It is safe to allow all detail products to freeze.
Answer
  • True
  • False

Question 68

Question
Microfiber towels should not be washed in a powder detergent because some particles may not dissolve and become lodged in the fibers; thus causing swirls and scratches when the towel is used again.
Answer
  • True
  • False

Question 69

Question
When washing a car, the wheels should ALWAYS be washed using a separate wash mitt.
Answer
  • True
  • False

Question 70

Question
Tire shine products should not be used on the tread of the tire, or on interior floor mats.
Answer
  • True
  • False

Question 71

Question
Claying a car will remove all pre-existing layers of wax.
Answer
  • True
  • False

Question 72

Question
After fully detailing the engine bay, it is a good idea to crank the vehicle to allow the water to dry off.
Answer
  • True
  • False

Question 73

Question
The engine bay should be done after the rest of the car is done.
Answer
  • True
  • False

Question 74

Question
When applying wax, sealants, polishes and compounds by hand or by machine, the best method is to use circular over lapping patterns.
Answer
  • True
  • False

Question 75

Question
It is safe to make modifications and bedazzle foam pads or other equipment.
Answer
  • True
  • False

Question 76

Question
When detailing the interior, one should always use microfiber towels to clean the dash cluster to prevent swirls.
Answer
  • True
  • False

Question 77

Question
A good remedy for restoring headlight lenses is to use Meguair's Scratch X 2.0
Answer
  • True
  • False

Question 78

Question
While removing severe oxidation from automotive paint, it is best to run on the highest speed setting when using a machine such as the porter cable 7424XP DA Polisher.
Answer
  • True
  • False

Question 79

Question
Mequiar's Machine Glaze may be used with a machine such as the Porter Cable 7424XP DA Polisher.
Answer
  • True
  • False

Question 80

Question
It is desirable to clean all tire shine residue off of the wheels because this causes brake and rail dust to stick.
Answer
  • True
  • False

Question 81

Question
Meguiar's Water Spot Remover will also remove existing layers of wax.
Answer
  • True
  • False

Question 82

Question
All of the different foam pads for machine polishers are identified by the color.
Answer
  • True
  • False

Question 83

Question
Which of the following statements are NOT true regarding foam pads. Mark all that apply.
Answer
  • A gray pad works well when applying sealants.
  • An orange cutting pad can be used with swirl X swirl remover.
  • One should always use an orange cutting pad with a wax.
  • A gray pad should be used with Meguiar's Ultimate Compound.

Question 84

Question
When applying wax, a thin layer is better than a thick layer.
Answer
  • True
  • False

Question 85

Question
Dark colors show up defects worse because darker colors absorb more light.
Answer
  • True
  • False

Question 86

Question
All microfiber towels are the same.
Answer
  • True
  • False

Question 87

Question
Depending on the paint condition, the polishing step can be skipped.
Answer
  • True
  • False

Question 88

Question
DA stands for Dual Action.
Answer
  • True
  • False

Question 89

Question
Before using a new foam pad with a machine polisher, what should always be done? Check all that apply.
Answer
  • Wash the pad thoroughly.
  • Spray a pad conditioner on the pad to lubricate it.
  • Bang the pad on your hand to knock out dust particles.
  • Spray two to three squirts of water to lubricate the pad in place of a pad conditioner.

Question 90

Question
Where on a car are inconspicuous areas? Mark all that apply.
Answer
  • On roof.
  • On hood.
  • In door Jam.
  • Under the hood.

Question 91

Question
Why is sheen better than shine on the dash of a vehicle? Check all that apply.
Answer
  • None of these.
  • One is not better than the other.
  • Because a shiny surface causes the sun to heat it and draw it up, resulting in a smeared film on the windows.
  • Because a shiny surface traps heat under it; possibly resulting over time in the dash cracking and fading.

Question 92

Question
Which best describes the difference between sheen and shine? Mark all that apply.
Answer
  • Sheen is a natural look.
  • Shine is a visible film.
  • Sheen is a visible film
  • All of these.
  • None of these.

Question 93

Question
When detailing chrome surfaces, which of the following is true? Mark all that apply.
Answer
  • 0000 Steel Wool will clean severe oxidation and restore it to it's original shine; but must be used with a lubricant, such as Quick Detail spray or glass cleaner.
  • Swirl marks sometimes can't be removed depending on the severity of the swirls, this due to how thin the chrome layer is on most accessories and body trim.
  • Chrome can be cleaned using Quick Detailer.
  • None of these.

Question 94

Question
Which one of the following chemicals are designed to apply a layer of protection? Mark all that apply.
Answer
  • Meguair's Ultimate Liquid Wax.
  • Meguiar's Ultimate Polish.
  • Meguiar's Mirror Glaze Professional Yellow Wax.
  • Meguair's Ultimate Compound.
  • Nu Finish Scratch Doctor.
  • Nu Finish Car Polish.
  • All of these.
  • None of these.

Question 95

Question
Which of the following is a reasonable order for products to use on an exterior detail job? Check all that apply.
Answer
  • Car Wash Concentrate, Clay, Swirl X Swirl Remover, Speed Glaze, Polymer Sealant, Ultimate Liquid Wax.
  • Car Wash Concentrate, Clay, Ultimate Polish, Show Car Glaze, Polymer Sealant, and then Lava wax.
  • Car Wash Concentrate, Ultimate Polish, Show Car Glaze, Ultimate Liquid Wax, then finally a sealant.
  • Car Wash Concentrate, clay, Ultimate Compound, Ultimate Polish, Machine Glaze, Polymer Sealant, Yellow Wax.

Question 96

Question
Which of the following is true regarding washing a vehicle while instilling minimal swirls? Mark all that apply.
Answer
  • Wash mitt out before putting it back into wash bucket water.
  • Get a grit guard to put into bottom of wash bucket.
  • Never use the same mitt on the wheels as you do the paint.
  • None of these.

Question 97

Question
Before using any paint correction chemical, one should always_________. Mark all that apply.
Answer
  • Check to see that the product is clear coat safe.
  • Check to see how the product should be applied.
  • Check the viscosity of the chemical.
  • All of these.
  • None of these.

Question 98

Question
Tire shine is safe to use on painted surfaces.
Answer
  • True
  • False

Question 99

Question
Wax should not be applied on a freshly painted car until the paint has cured.
Answer
  • True
  • False

Question 100

Question
B-Pilar swirls and scratches may be removed the same way as the rest of the paint.
Answer
  • True
  • False

Question 101

Question
Polishers should not be used with a backing plate that is larger than the pad.
Answer
  • True
  • False

Question 102

Question
Interior detail products such as armor all is safe to be used on steering wheels and brake pedals.
Answer
  • True
  • False

Question 103

Question
Leather seats can be cleaned using 70% isopropyl alcohol.
Answer
  • True
  • False

Question 104

Question
Purple Power Citrus Cleaner should not be used to clean leather seats or the like.
Answer
  • True
  • False

Question 105

Question
Aluminum wheels can be cleaned using pure purple power.
Answer
  • True
  • False

Question 106

Question
Leather cleaners should not be sprayed directly on the surface; instead, it should be sprayed on the microfiber towels and wiped on.
Answer
  • True
  • False

Question 107

Question
Fully saturating the headliner is safe while detailing.
Answer
  • True
  • False

Question 108

Question
Any type of steel wool can be used to thoroughly clean the windshield.
Answer
  • True
  • False

Question 109

Question
Meguiar's Ultimate Compound is a safe chemical to thoroughly clean exterior glass surfaces.
Answer
  • True
  • False

Question 110

Question
Microfiber towels work better than newspaper or paper towels when cleaning glass.
Answer
  • True
  • False

Question 111

Question
What products can be used to prevent the interior windows from fogging? Check all that apply.
Answer
  • Rain X Never Fog.
  • Vinegar and Water Solution.
  • Barbasol Shaving Cream.
  • All of the above.
  • None of the above.

Question 112

Question
Carpet and upholstery should ONLY be scrubbed with soft bristle brushes.
Answer
  • True
  • False

Question 113

Question
Waxes typically apply easier in colder temperatures.
Answer
  • True
  • False

Question 114

Question
Detail mist may be sprayed on the car while applying paste wax.
Answer
  • True
  • False

Question 115

Question
Moderately dirty vehicles may be detailed using a product such as Meguiar's Ultimate Quick Detailer.
Answer
  • True
  • False

Question 116

Question
Holograms are paint defects that typically look like Christmas tree shaped swirl marks.
Answer
  • True
  • False

Question 117

Question
Which of the following pad/chemical combination is reasonable for glass polishing?
Answer
  • A Lake Country CCS Orange Light Cutting Pad with Meguiar's Water Spot Remover.
  • A Lake Country CCS White Polishing Pad with Meguiar's spray type Water Spot Remover.
  • Lake Country CCS Orange Light Cutting Pad with Meguiar's spray type Water Spot Remover.
  • None of these.
  • All of these.

Question 118

Question
When polishing diamond plate, which type pad works best?
Answer
  • Wool.
  • Foam.
  • Microfiber.
  • All of these.
  • None of these.

Question 119

Question
Paint on different make cars may be harder or softer than the other.
Answer
  • True
  • False

Question 120

Question
When cleaning LCD screens or the like, one should always avoid spraying a cleaner directly on the surface.
Answer
  • True
  • False

Question 121

Question
Purple Power is safe to clean LCD screens.
Answer
  • True
  • False

Question 122

Question
Meguiar's Polymer Sealant takes up to twelve hours to completely bond to the surface through covalent bonding.
Answer
  • True
  • False

Question 123

Question
When using an aggressive product such as Chemical Guys V34 Optimal Grade Cutting Polish on soft B-Pillar paint, the product will cut through the defects but will often leave marring.
Answer
  • True
  • False

Question 124

Question
Which of the following from the list of Chemical Guys products are the MOST aggressive?
Answer
  • V32.
  • V34.
  • V36.
  • V38.

Question 125

Question
Which of the following products is designed to polish a plastic instrument cluster? Check all that apply.
Answer
  • Meguiar's PlastX.
  • Meguiar's Clear Plastic Cleaner.
  • Meguiar's Clear Plastic Polish.
  • All of these.
  • None of these.

Question 126

Question
Which pad/product combo will provide the most abrasive combination.
Answer
  • 4 inch wool pad and Chemical Guys V32
  • 6 inch wool pad and Ultimate Compound.
  • 4 inch foam yellow cutting pad and Ultimate Compound.
  • 6 inch Orange light cutting pad and Chemical Guys V34

Question 127

Question
Smaller pads are more aggressive than larger pads.
Answer
  • True
  • False

Question 128

Question
When working on glass with water spot remover using a DA polisher such as the porter cable 7424XP, it is more efficient to use the softest pad.
Answer
  • True
  • False

Question 129

Question
It is safe to use mild degreasers to detail the pedals.
Answer
  • True
  • False

Question 130

Question
Typically, which will remove spray paint gravity off of car paint?
Answer
  • Depending on the brand paint, a wax.
  • A mild swirl remover.
  • Compound.
  • All of these.
  • None of these.

Question 131

Question
This picture contains a defect most commonly referred to as_________; which is caused primarily by improper___________.
Image:
9b191213-ca28-4dc4-ab7e-98897b7a63ec (image/jpg)
Answer
  • Holograms, Polishing
  • Oxidation, Waxing
  • Solvent Popping, Painting.
  • Buffer Swirls, Painting

Question 132

Question
This picture contains a defects oftentimes referred to as_____________; which is primarily caused by___________.
Image:
cc91359b-2c7f-4d70-85bb-578f741e6089 (image/jpg)
Answer
  • Swirl Marks, improper detailing techniques (including washing, waxing, etc.).
  • Solvent Popping, improper waxing.
  • Solvent Popping, improper quick detailing.
  • Water Spots, improper detailing.

Question 133

Question
From the following pictures, which illustrates solvent popping?
Answer

Question 134

Question
Which of the following promotes clear coat failure? Mark all that apply.
Answer
  • Not keeping the vehicle waxed and sealed.
  • Thinning the clear coat by compounding too much.
  • Waxing too often.
  • Improper washing.

Question 135

Question
Water etching is primarily caused by allowing contaminants to remain on the paint surface for too long under certain conditions.
Answer
  • True
  • False

Question 136

Question
This picture illustrates a prime example of severe oxidation.
Image:
d3eb9c84-b2cc-4a82-9675-435b9431ae5b (image/jpg)
Answer
  • True
  • False

Question 137

Question
D114 is a ________ product
Answer
  • Quick detail
  • Water-less wash
  • Wax
  • Multi-purpose cleaner/degreaser

Question 138

Question
Which of the following are considered water-less wash products? Check all that apply.
Answer
  • D114
  • Chemical Guys Eco-Smart
  • Meguiar's Ultimate Wash and Wax Anywhere
  • Meguairs Ultimate Quick Detailer
  • Chemical Guys Hose Free Eco-Wash

Question 139

Question
In terms of chemistry, which is the safest degreaser product to use when detailing the engine bay to assure not harming the paint if there is any over spray?
Answer
  • Acid based products
  • Water based products
  • oil based

Question 140

Question
When detailing the engine bay, sprays work better than gels when trying to restore hoses, plastics, etc.
Answer
  • True
  • False
Show full summary Hide full summary

Want to create your own Quizzes for free with GoConqr? Learn more.

Similar

Spanish Conversation Phrases
silviaod119
Was the Weimar Republic doomed from the start?
Louisa Wania
AQA GCSE Chemistry Unit 2.1
Matthew T
GCSE Mathematics Topics
goldsmith.elisa
Physics: Energy resources and energy transfer
katgads
1984 - Good quotes to memorise
jenniferlg
Topic 1 Quiz - Elements & The Periodic Table
Musicdudejoe
untitled 2
lola_smily
GCSE - Introduction to Economics
James Dodd
The Changing Natural Environment Part 2
R S
Browse Library